BRHKT - METAL PARTS PROTECTOR, 7540
- MSDS: BRHKT
- Manufacturer: CHEMICAL PACKAGING CORP
- Product Name: METAL PARTS PROTECTOR, 7540
- National Stock Number: 6850-00N038747
Product Identification
Product ID:METAL PARTS PROTECTOR, 7540
MSDS Date:12/09/1985
FSC:6850
NIIN:00N038747
MSDS Number: BRHKT
Responsible Party
US
Emergency Phone: 305-974-5440
Info Phone: 305-974-5440
Preparer: W. SMITH
Cage: 57040
Contractor
Telephone: 305-974-5440
Cage: 57040
Ingredients
MINERAL SPIRITS
CAS: 64742-88-7
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
PROPANE, 2-METHYL-; (BUTANE)
CAS: 75-28-5
RTECS: TZ4300000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESSIVE INHAL OF
VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION, DIZZINESS,
WEAKNESS, FATIGUE, NAUSEA, HEADACHES AND POSSIBLE UNCONSCIOUSNESS.
SKIN: PROLONGED OR REPEATED CONTACT CA N CAUSE MODERATE IRRITATION,
DEFATTING AND DERMATITIS. INGEST: CAN CAUSE GASTROINTESTINAL
IRRITATION, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: NAUSEA, VOMITING AND DIARRHEA.
ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL PNEUMONITIS.
EYES: CAN CAUSE SEVERE IRRITATION, REDNESS, TEARING AND BLURRED
VISION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/WATER, FOR AT LEAST 15 MINUTES, LIFTING LIDS.
GET MEDICAL ATTENTION. SKIN: WASH EXPOSED AREA W/SOAP & WATER.
INHAL: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER
OXYGEN. IF BREATHING HAS STOPPED GIVE ARTIFICIAL RESPIRATION. GET
MEDICAL ATTENTION. INGEST: DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION. ASPIRATION OF MATERIAL INTO LUNGS DUE TO VOMIT CAN CAUSE
CHEM PNEUM.
Fire Fighting
Flash Point Method:TOC
Flash Point:133F,56C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . KEEP CNTRS COOL. USE EQUIP/SHIELD TO PROTECT
PERS AGAINST BURST, RUPTURE, OR VENTING CONTRS.
Unusual Fire/Explosion Hazard:@ ELEVATED TEMPERATURES (ABOVE 120F)
CONTAINERS MAY VENT, RUPTURE OR BURST.
Accidental Release
Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. CONSULT
FEDERAL, STATE OR LOCAL DISPOSAL AUTHORITIES FOR APPROVED DISPOSAL
PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
120F.
Other Precautions:PLEASE READ AND FOLLOW DIRECTIONS ON PRODUCT LABEL;
THEY ARE YOUR BEST GUIDE TO USING THIS PRODUCT IN MOST EFFECTIVE
WAY, & GIVE NECESSARY SAFETY PRECAUTIONS TO PROTECT YOUR HEALTH.
Exposure Controls
Respiratory Protection:GENERAL VENTILATION ADEQUATE. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE SUFFICIENT MECHANICAL(GENERAL) &/OR LOCAL EXHAUST
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR RESISTANT GLOVES SUCH (SUPP DATA)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DO NOT EAT, DRINK/SMOKE IN WORK AREA, WASH
HANDS BEFORE EATING.
Supplemental Safety and Health
WASTE DISP METH: FACILITY. CONSULT FEDERAL, STATE AND LOCAL DISPOSAL
AUTHORITIES FOR APPROVED PROCEDURES. PROT GLOVES: AS: NITRILE
RUBBER/POLYVINYL CHLORIDE.
Chemical Properties
Vapor Pres:65@75F
Spec Gravity:0.863(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN VISCOUS LIQUID, CHARACTERISTIC ODOR.
Percent Volatiles by Volume:>66
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS/BASES, SELECTED AMINES.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE &/OR CARBON DIOXIDE.
Disposal
Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PROD DO NOT GENERATE
HAZ WASTE. EMPTY DE-PRESSURIZED CONTRS CAN NOT BE REUSED & SHOULD
BE WRAPPED & PUT IN TRASH COLLECTION. CANS WHICH ARE
PRESSURIZED/CNTN LIQ MUST BE DISP OSED OF IN A PERMITTED WASTE
MANAGEMENT(SUPP DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.